MedocMad wrote:
cheers chaps !!
What sort of money did it cost in total including linning pipes etc ??
Rich - Lining the flue.
Given that you have to duck away from the cobwebs as you decend the stairs into your cellar
Are we talking about a country manor with high stack and ornate period chimneys ?
This is a general comment below:
This is necessary only on a pre 1st world war brick and older arts and crafts cottage, a stone chimney could be ok, depends on how well it has been constructed and pointed. A modern chimney could be ok. Before 1st WW, When the flue was parged with dung and lime cement, there are some issues if the debris blocks the suction on the narrow cast iron pipe on the top of the stove. How much fall (debris) do you get in the grate each morning ? Will an iron cowl fit well in the initial opening of the flue above the lintel ? A well fitting iron cowl could eliminate a flue liner.
A tall chimney will suck like mad in a windy location, and you will need to close the draft from the bottom of the fire (stove grate), above the hearth.
If you dont know stuff, it may be better that you call for a survey. Believe me, getting the chimney swept in a Victorian or older property is essential. The Sweep can advise on the condition of the flue.
what you might call, a serious chimney
Cheers